- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- LED série de lampes anti-dé..
- LED Eclairage industriel Sé..
- LED lampe de rue série
- Série lampe à décharge
- L'éclairage industriel Série
- Série de lampes végétales e..
- Mobile série d'éclairage
- Fixe série légère anti-défl..
- Anti-déflagrant électrique ..
- Anti-corrosion électrique e..
- Liens amicaux
- emballage, le papier entreprises
- emballage, le papier produits
- emballage, le papier acheter des fils
- Ma carte de visite
- China Business Nouvelles
- Mon magasin mobile
- Anti-déflagrant électri..
- Anti-déflagrant d'écono..
- Anti-déflagrant fluores..
- Antidéflagrants non-pol..
- Mobile d'éclairage
- Lampe LED minière
- éclairage industriel
- Lampes à DEL antidéflag..
- LED lumières de rue
- Un éclairage fixe
- Efficace et respectueus..
- Honnêteté
- Histon électrique
- La qualité d'abord
- Faible teneur en carbon..
- Yixing Vantage Electric..
Nom du produit: | BAD808-L2LED explosion de l'usine chimique preuve prix de la rue lampadaire |
Publié: | 2014-06-11 |
Type de produit: | BAD808-L2 |
Description du produit: | La preuve BAD808-L2LED lampadaires de ● Portée 1 et la zone 2 IIA, IIB classe T1 ~ groupe T6 atmosphère explosive, comme les plantes ou les lieux des fins d'éclairage. feux antidéflagrants peuvent fonctionner de manière fiable dans les conditions ● altitude suivante ne dépasse pas 2000m, la température de l'environnement d'exploitation ● -20 ~ +40 ℃; ● l'air ambiant d'humidité relative inférieure à 98% (quand la température est 25 ℃); ● s'applique à un Zone 2, classe II T1 ~ groupe T6 atmosphère explosive; ● sans endommager les propriétés métalliques et diélectriques de gaz et de vapeurs place; ● en l'absence de secousse importante et les vibrations de choc; degré de pollution 3 ●; ● classe Catégorie d'installation II. ◎ standard structurel caractéristiques ● Produit: GB3836.1 ~ 2-2010, Q / HH 001-2011. ● Ce produit est coquille d'alliage d'aluminium, après le décapage surface pulvérisation électrostatique à grande vitesse, étanche à l'eau, à la corrosion et d'autres fonctions. Attaches en acier inoxydable exposées, pièces transparentes de choc à haute énergie verre trempé résistant, l'éclairage de la structure des joints antidéflagrants bouche terminés, mais la source de lumière et de la cavité de la chambre de cablage, le lecteur de cavité séparée, l'installation et l'entretien facile et la performance électrique fiable; utilisation de l'aluminium de haute qualité réflecteur couvrir, d'améliorer l'efficacité de la lampe. ● L'éclairage intérieur et extérieur de la coque a une vis de mise à la terre, les utilisateurs du produit doivent être mis à la terre. Spécifications tension ◎ catégorie preuve Ex II B T6 Gb classé 220VAC 50Hz Puissance 50W 60W 80W LED type de protection IP65 catégorie WF2 Dimensions source 446 × 166 × 306 mm montage mural (b) au plafond (x) intégré (q) lampadaires formule (m) ◎ ● LED utilisent et l'entretien doivent être vérifiés avant l'installation est listé sur la plaque signalétique données techniques de base correspondent aux conditions réelles d'utilisation. ● avoir le diamètre équivalent φ10mm ~ φ14mm d'entrée de cable à travers le joint en caoutchouc sur l'introduction de terminaux connectés, introduites par l'écrou de compression pour serrer le cable de sorte que le joint et empêcher arrachent. ● Avant utilisation, vérifier le cablage est correct, les vis de fixation (vis) sont fixés au bo?tier. fil de terre du cable doit être mise à la terre fiable. ● Lors de l'entretien "ouvertures non électrifiées" et ne peut pas remonter, endommager le joint en caoutchouc. ● la réparation, s'il est trouvé pour introduire les joints, les joints et autres dispositifs sont le vieillissement, devrait être remplacé pour assurer l'efficacité de la protection. ◎ stockage de transport ● lumières dans le processus de transport à LED, devrait empêcher un fort impact ou vibration, et devrait avoir des mesures pour empêcher la pluie et la neige. ● LED feux doivent être stockés dans la circulation d'air, pas de gouttes d'eau et de l'invasion liquide, la température ambiante ne dépasse pas 40 ℃, pas inférieure à -25 ℃, l'humidité relative de l'air inférieure à 98% (25 ℃) entrep?t. ● dans l'environnement de stockage autour de la lampe LED ne devrait pas endommager le métal et l'isolant contenant des gaz corrosifs. Assurance de la qualité ◎ ● Ce produit strictement selon IS09001: 2000 du système de gestion de qualité internationales de contr?le de qualité pour assurer la qualité du produit est plus élevé que les normes nationales satisfont pleinement les exigences de conception dans les trois ans suivant leur achat, tout dysfonctionnement (panne non humain) se produit par le produit en utilisation normale maintenance de la compagnie libre. |
Vous êtes le 980441 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Yixing Hua Hong Electronics Manufacturing Co., Ltd Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie