- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- LED série de lampes anti-dé..
- LED Eclairage industriel Sé..
- LED lampe de rue série
- Série lampe à décharge
- L'éclairage industriel Série
- Série de lampes végétales e..
- Mobile série d'éclairage
- Fixe série légère anti-défl..
- Anti-déflagrant électrique ..
- Anti-corrosion électrique e..
- Liens amicaux
- emballage, le papier entreprises
- emballage, le papier produits
- emballage, le papier acheter des fils
- Ma carte de visite
- China Business Nouvelles
- Mon magasin mobile
- Anti-déflagrant électri..
- Anti-déflagrant d'écono..
- Anti-déflagrant fluores..
- Antidéflagrants non-pol..
- Mobile d'éclairage
- Lampe LED minière
- éclairage industriel
- Lampes à DEL antidéflag..
- LED lumières de rue
- Un éclairage fixe
- Efficace et respectueus..
- Honnêteté
- Histon électrique
- La qualité d'abord
- Faible teneur en carbon..
- Yixing Vantage Electric..
- Maison > Produit >Antidéflagrants lampe LED explosion de l'usine de la lampe LED explosion BAD808-M (II) lumières LED preuve
Nom du produit: | Antidéflagrants lampe LED explosion de l'usine de la lampe LED explosion BAD808-M (II) lumières LED preuve |
Publié: | 2015-06-30 |
Type de produit: | BAD808 |
Description du produit: | Explosion BAD808-M (II) LED lumières preuve feux antidéflagrants explosion LED lumières d'usine de LED preuve ◎ BAD808-M (II) explosion LED preuve feux Portée ● 1 et zone 2 IIA, groupe T6 ~ IIB classe T1 environnement de gaz explosif, Comme les usines ou lieux éclairage fins. L'explosion qui éclaire preuve feux BAD808-M (II) LED dans les conditions suivantes peuvent être fonctionner de manière fiable ● altitude ne dépasse pas 2000m; ● température ambiante de fonctionnement est de -20 ~ + 40 ℃:; ● l'air ambiant humidité relative inférieure à 98% (lorsque la température à + 25 ℃); ● adapté pour 1 et Zone 2, classe II T1 ~ groupe T6 environnement de gaz explosif; ● sans endommager les propriétés métalliques et d'isolation de gaz et de vapeurs place; ● en l'absence d'une secousse importante et les vibrations de choc ● degré de pollution 级 3 ;; catégorie ● Installation des classes II. ◎ BAD808-M (II) standard explosion lumières LED preuve caractéristiques structurelles ● Produit: GB3836.1 ~ 2-2010, Q / HH 001-2011. ● Ce produit est en alliage d'aluminium, après le tir haut débit dynamitage surface pulvérisation électrostatique, étanche, anti-poussière, anti-corrosion et d'autres fonctions. Fixations en acier exposée inoxydable, parties transparentes sont faites de verre trempé contre les chocs de haute énergie, explosion de lampe de joints structure de la bouche seulement, mais la chambre de source de lumière et la chambre de raccordement, chambre d'entra?nement séparés, installation facile et l'entretien, et la performance électrique fiable; aluminium de haute qualité réflecteur couverture, améliorer l'efficacité de la lampe. ● La lampe a une vis de terre à l'intérieur et à l'extérieur de la coque, l'utilisateur utilise le produit doit être mis à la terre. ◎ BAD808-M (II) explosion LED étanche à la lumière des paramètres techniques Explosion Proof Exd II B T6 Gb tension nominale 220VAC 50Hz de puissance nominale 50W 60W 70W 80W LED type de source de lumière de protection IP65 corrosion qualité WF2 Dimensions Φ260 × H285mm pendentif d'installation (G avant) murales 30 ℃ (b1) murales 90 ℃ (b2) Type de cl?ture plafond (x) (f) Méthode colonnaire (h) ◎ BAD808-M (II) explosion lumières LED utilisent preuve et l'entretien ● LED feux installés doit vérifier si les données techniques de base figurant sur la ligne de plaque signalétique avec les conditions réelles d'utilisation. ● Il ya égale à la φ10mm diamètre ~ entrée de cable φ14mm par le passe dans l'accès au terminal, avec l'introduction de l'écrou de serrage de cable pressé de faire le joint, et empêche retirer. ● Avant utilisation, vérifier le cablage est correct, les vis de fixation (vis) sont fixés au bo?tier. Cable fil de mise à la terre doit être mise à la terre fiable. ● entretien "Pas ouvertures live" et ne peut pas cogner, joint en caoutchouc dommages. ● la réparation, si trouvé à introduire joints, les joints et autres dispositifs vieillissent, doit être remplacé, pour assurer des propriétés protectrices. ◎ BAD808-M (II) explosion lumières LED preuve transport et le stockage ● LED pendant le transport doivent éviter les chocs ou de fortes vibrations, et devrait avoir des mesures pour empêcher la pluie et la neige. ● lampe LED doit être stocké dans la circulation d'air, pas de gouttes d'eau et l'invasion liquide, la température ambiante ne dépasse pas + 40 ℃, pas inférieure à -25 ℃, l'humidité relative de l'air inférieure à 98% (+ 25 ℃) entrep?t. ● LED autour de l'environnement de stockage ne devraient pas contenir de métal et endommager l'isolation des gaz corrosifs. Explosion feux preuve assurance de la qualité ● ◎ BAD808-M (II) LED Ce produit est en stricte conformité avec IS09001: 2000 normes de systèmes de management de la qualité internationaux pour le contr?le de la qualité pour assurer la qualité du produit est plus élevé que les normes nationales répondent pleinement aux exigences de conception, depuis l'achat de trois ans, les produits en utilisation normale toute défaillance (défaut non humain) sans entretien par la Société. Explosion BAD808-M (II) LED lumières preuve BAD808-M (II) explosion lumières LED preuve Prix BAD808-M (II) explosion LED fabricants de feux de preuve |
Vous êtes le 980441 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Yixing Hua Hong Electronics Manufacturing Co., Ltd Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie