- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- LED série de lampes anti-dé..
- LED Eclairage industriel Sé..
- LED lampe de rue série
- Série lampe à décharge
- L'éclairage industriel Série
- Série de lampes végétales e..
- Mobile série d'éclairage
- Fixe série légère anti-défl..
- Anti-déflagrant électrique ..
- Anti-corrosion électrique e..
- Liens amicaux
- emballage, le papier entreprises
- emballage, le papier produits
- emballage, le papier acheter des fils
- Ma carte de visite
- China Business Nouvelles
- Mon magasin mobile
- Anti-déflagrant électri..
- Anti-déflagrant d'écono..
- Anti-déflagrant fluores..
- Antidéflagrants non-pol..
- Mobile d'éclairage
- Lampe LED minière
- éclairage industriel
- Lampes à DEL antidéflag..
- LED lumières de rue
- Un éclairage fixe
- Efficace et respectueus..
- Honnêteté
- Histon électrique
- La qualité d'abord
- Faible teneur en carbon..
- Yixing Vantage Electric..
Nom du produit: | lampe de plateforme d'essai mené BAD808-PMDEL lampe de plateforme d'essai |
Publié: | 2015-07-11 |
Type de produit: | BAD808-M |
Description du produit: | Feux de preuve 50W 60W 70Wled, l'éclairage anti-explosion, lampes à led ronde 20wled lampe de plate-forme anti-déflagrant, éclairage anti-explosion conduit 20wled BAD808-PMDEL lampe plateforme preuve LED explosion Series LED lumières preuve, les lumières explosion LED preuve, éclairage LED anti-explosion, anti-explosion lumières LED, les lampes LED, comme le trou à l'épreuve, de forte puissance LED explosion feux preuve, l'explosion qui éclaire preuve LED, lampes à LED anti-explosion pour la lumière, feux anti-explosion économes en énergie LED, lampes à économie d'énergie LED explosion éclairage LED preuve LED explosion feux preuve avec la nouvelle source de lumière LED, longue durée de vie , de l'énergie à faible émission de carbone, à haute efficacité, facteur de sécurité élevé, la couleur est bonne. Applications: ● Pour le pétrole, la pétrochimie, la construction navale et d'autres endroits inflammables et explosifs. ● adapté pour les lieux inflammables et explosifs route, des sites d'exploitation et de construction intérieure et extérieure, etc. associés à l'éclairage fixe. Les caractéristiques structurelles: ● l'éclairage anti-déflagrant, fonctionnement s?r et fiable dans des zones dangereuses explosives. ● Importé blanc-LED haute puissance source solide d'état de léger, de haute efficacité lumineuse, longue durée de vie de 100.000 heures, peut réaliser la maintenance à long terme. ● faible consommation d'énergie, la consommation d'énergie est à seulement 20% du même flux lumineux à incandescence. ● corps de lumière avec un matériau en alliage léger, de haute résistance, résistance à la corrosion, résistance à l'impact, les parties transparentes à haute température résistant en verre spécial, élargir l'espace pour la dissipation de la chaleur, réduire l'augmentation de température et d'augmenter la vie de la lampe. ● allumer le revêtement de surface utilisant la dernière technologie, pas de couleur, pas de rouille, l'eau et la pluie peuvent également être utilisé à long terme à l'extérieur. ● Petite taille, poids léger, une variété de l'installation peut être pendentif, mur, plafond et le type de p?le, etc., opération simple. Explosion techniques Preuve Exd II B T6 Gb tension nominale 220VAC 50Hz puissance nominale 50W 60W 70W 80W type LED source de protection IP65 corrosion qualité WF2 Dimensions Φ260 × H285mm l'installation pendentif (G) paroi 30 ℃ (b1) paroi 90 ℃ (b2) Plafond (x) la formule de garde-corps (f) Méthode colonnaire (h) l'explosion qui éclaire preuve généralement fondées sur la sélection des sources de lumière, anti-déflagrant type de structure, la classification d'utilisation. Par classification preuve lumière incandescente, lampe à mercure haute pression anti-explosion, une basse pression lampes fluorescentes anti-explosion, et une autre source de lumière hybride; par type classification luminaires structurelles antidéflagrants, l'augmentation de l'éclairage de sécurité, éclairage complexe et similaires; la classification par l'utilisation de manière fixe le style explosion d'éclairage et éclairage protégés portable. Selon le type de protection antidéflagrante divisé selon le type de protection, une sécurité accrue, une pression positive, pas d'étincelles et la poussière anti-explosion total de cinq principaux types peut également être d'autres types de protection et une combinaison de ces différents types de protection par la forme ou complexe et le type spécial. Protection contre les chocs électriques selon le type peut être divisé selon le type de protection contre les chocs électriques Ⅰ, Ⅱ, Ⅲ classe. La protection contre les chocs électriques est d'empêcher la preuve logement de lampe parties accessibles en direct, le choc électrique de corps conducteur ou des potentiels différents allumage tactile et enflammer des mélanges explosifs. Classe AⅠ - l'isolation de base, sur la base des parties conductrices accessibles pendant le fonctionnement normal ne sont pas facturés à la ligne fixe reliant le conducteur de protection. BⅡ classe - avec une double isolation ou une isolation renforcée comme une mesure de sécurité, pas de protection du sol. CⅢ classe - avec une valeur valide pas supérieure à la tension sécuritaire 50v, et dans lequel ne dépasse pas cette valeur. Classe D0 - seulement compter sur une isolation de base comme une mesure de sécurité. La plupart de la protection de l'éclairage anti-explosion contre le type de choc électrique est I, lampes de type, seul un petit nombre de classe Ⅱ, Ⅲ lampes de type. Par exemple: l'éclairage anti-explosion en plastique, anti-déflagrant lampe de poche. Tapez le principe anti-explosion symbole d antidéflagrants le dispositif pourrait enflammer le mélange de gaz de pièces frits sont tout enfermé dans une coque, la coque peut résister à toutes les articulations ou structurelle logements de fossé, pénétrer à l'intérieur du bo?tier et le mélange combustible dans une explosion interne aucun dommage, et de veiller à ce que le gaz de la flamme interne réduit l'énergie se propager à travers l'espace suffisant pour faire exploser la coquille de gaz. Ligne a augmenté de sécurité E ne produit pas un arc dans des conditions normales de fonctionnement, l'étincelle de l'équipement électrique de prendre des mesures supplémentaires pour améliorer sa sécurité, ses composants internes et externes afin de prévenir d'éventuelles dangereuses températures, arcs et les étincelles de possibilité de type anti-déflagrant, prendre de nouvelles mesures pour protéger la structure, d'améliorer la fiabilité et la sécurité de l'appareil. P pression positive dans l'enceinte par le maintien de l'équipement pression de gaz de protection au-dessus de la pression ambiante entourant la preuve de la sécurité des équipements électriques dans le système pour protéger la pression statique ou maintenir le flux continu d'air ou de gaz inerte, de limiter le mélange combustible pénètre à l'intérieur du bo?tier. Lors de la prise du dispositif dans l'état sans pression à l'intérieur du gaz combustible à l'intérieur du bo?tier, pour empêcher la formation d'un mélange inflammable dans le bo?tier. Le placement de tous les circuits à l'intérieur de la machine que je dois aux conditions standards (y compris le fonctionnement normal et les conditions de défaut spécifiées), toute étincelle ni aucun effet au cours pas peut repérer prescrite sécurité intrinsèque environnement de gaz circuit d'explosion. Encapsulation m peut produire des étincelles allument un mélange explosif contenant une matière explosive, arcs ou une partie de température dangereuse des composants électriques encapsulés dans versant étanchéité (complexe), et il ne peut pas allumer un mélange explosif entourant l'utilisation de l'encapsulation Mesures visant à empêcher un court-circuit des composants électriques, guérir isolation électrique, pour éviter les étincelles et les arcs et la température dangereuse du circuit d'allumage de production pour éviter l'intrusion de mélanges explosifs, la température de surface de contr?le dans des conditions normales et de défaut. Type d'huile o pour les composants de l'appareil ou de l'équipement à l'intrusion d'huile solution de protection I l, donc ils ne peuvent pas pointer dessus de la surface de carburant ou la coquille explosion à l'extérieur atmosphère. Sable q rempli remplie de sable ou d'autres caractéristiques spécifiques de la matière en poudre dans le bo?tier, de sorte que dans les conditions d'utilisation spécifiées, Shell arc électrique ou la chaleur générée par l'équipement électrique ne peut pas allumer le type de gaz explosif de l'environnement immédiat de la protection. étanche au gaz équipements h type de classe anti-explosion enveloppe hermétique. Voilà l'environnement des mélanges gazeux explosifs ne peuvent pas envahir le bo?tier de l'appareil. Enveloppe étanche à l'air est fait d'extrusion à chaud ou la méthode d'étanchéité adhésif, ce cas la plupart du temps non amovible, afin de garantir une étanchéité durable. Appuyez sur chassis classification de notation selon au logement de la classe de protection: Pour protéger de la poussière, des corps solides et de l'eau dans la lampe de lumière, toucher ou le volume réglé pour produire arc, les courts-circuits ou d'endommager l'isolation électrique et d'autres parties actives dangereuses, une variété de la protection de la coquille jouer ainsi un r?le dans la protection isolation électrique. Avec des lettres caractéristiques "IP" suivi de deux chiffres pour représenter sa protection de la coquille. Le premier chiffre représente une protection contre la poussière humaine, les objets solides ou. Divisé en 0-6 grade. éclairage à l'épreuve est un luminaire étanche, sa capacité de poussière d'au moins plus de quatre, les deux premiers chiffres indiquent la protection des eaux, divisée en 0-8 grade. Lighting Design par le matériau de surface d'appui en fonction de la conception de l'éclairage de l'appui classification des matériaux de surface: l'éclairage de la preuve intérieure peut être installé dans un certain nombre appartenant aux ordinaires combustibles surfaces des matériaux, tels que des murs en bois et le plafond, ils ne permettent pas l'installation de la température de surface de l'éclairage anti-explosion dépasse la valeur de sécurité. Selon que l'éclairage anti-explosion peut être installé directement dans les matériaux combustibles ordinaires peut être divisé en deux catégories surface. Un pour le seul adapté à l'installation dans un lampes de surface non-combustibles. Un autre est adapté pour le montage direct sur normalement inflammables éclairage de surface du matériau, symbole marqué. En outre, selon l'installation peut être divisé en fixe, transportable, et portable. |
Vous êtes le 980441 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Yixing Hua Hong Electronics Manufacturing Co., Ltd Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie