- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- LED série de lampes anti-dé..
- LED Eclairage industriel Sé..
- LED lampe de rue série
- Série lampe à décharge
- L'éclairage industriel Série
- Série de lampes végétales e..
- Mobile série d'éclairage
- Fixe série légère anti-défl..
- Anti-déflagrant électrique ..
- Anti-corrosion électrique e..
- Liens amicaux
- emballage, le papier entreprises
- emballage, le papier produits
- emballage, le papier acheter des fils
- Ma carte de visite
- China Business Nouvelles
- Mon magasin mobile
- Anti-déflagrant électri..
- Anti-déflagrant d'écono..
- Anti-déflagrant fluores..
- Antidéflagrants non-pol..
- Mobile d'éclairage
- Lampe LED minière
- éclairage industriel
- Lampes à DEL antidéflag..
- LED lumières de rue
- Un éclairage fixe
- Efficace et respectueus..
- Honnêteté
- Histon électrique
- La qualité d'abord
- Faible teneur en carbon..
- Yixing Vantage Electric..
- Maison > Fournir > Explosion BAD808-M (II) lumières LED preuve BAD808-M (II) LED fabricant de la lampe électrique Vantage Explosion production de la lampe preuve
Nom de l'information: | Explosion BAD808-M (II) lumières LED preuve BAD808-M (II) LED fabricant de la lampe électrique Vantage Explosion production de la lampe preuve |
Publié: | 2014-10-08 |
Validité: | 3000 |
Caractéristiques: | Explosion BAD808-M (II) lumières LED preuve |
Quantité: | 1000.00 |
Description Prix: | |
Description détaillée du produit: | Explosion BAD808-M (II) lumières LED preuve ◎ BAD808-M (II) explosion lumières LED preuve Portée ● Dans une Zone 2 IIA, IIB classe T1 ~ T6 groupe atmosphère explosive, comme les usines ou les lieux des fins d'éclairage. Explosion BAD808-M (II) LED lumières preuve lumières sous les conditions suivantes peuvent être fiable ● altitude ne dépasse pas 2000 m; ● température ambiante de fonctionnement est de -20 ~ + 40 ℃:; ● l'air ambiant d'humidité relative inférieure à 98% (lorsque la température à + 25 ℃); ● s'applique à une zone 2, classe II T1 ~ T6 groupe atmosphère explosive; ● Aucun dommage en métal et les propriétés isolantes de gaz et de vapeurs place; ● Aucune secousse importante et en état de choc et de vibration ● Niveau de pollution 3 ;; ● installation de catégorie II endroits de la classe. ◎ BAD808-M (II) explosion LED preuve caractéristiques structurelles lumière ● Norme de produit: GB3836.1 ~ 2-2010, Q / HH 001-2011. ● Ce produit est en alliage d'aluminium, après décapage de surface électrostatique pulvérisation à grande vitesse, étanche à l'eau, anti-corrosion et d'autres fonctions. Acier exposée attaches en acier inoxydable, les parties transparentes à l'aide de l'impact à haute énergie résistant en verre trempé, lampes pour antidéflagrants bouche articulations de la structure uniquement, mais la source de lumière et de la cavité de la chambre de cablage, le lecteur de cavité séparée, l'installation et l'entretien facile et la performance électrique fiable; utilisation de l'aluminium de haute qualité réflecteur couverture, d'améliorer l'efficacité de la lampe. ● L'éclairage intérieur et extérieur de la coque a une vis de terre, les utilisateurs doivent être fondées sur l'utilisation du produit. Explosion ◎ BAD808-M (II) LED étanche à la lumière des paramètres de qualité technique Ex II B T6 Gb tension nominale 220VAC 50Hz Puissance 50W 60W 70W 80W LED type de protection IP65 catégorie WF2 Dimension Φ260 × H285mm pendentif d'installation source (G avant) la paroi 30 ℃ (b1) paroi 90 ℃ (plafond b2) de style de cl?ture (x) (f) de la loi-colonne (h) ◎ BAD808-M (II) explosion lumières LED preuve utilisation et de maintenance ● LED feux installés doit vérifier si les données techniques de base figurant sur la ligne de la plaque signalétique avec les conditions réelles d'utilisation. ● Il ya la φ10mm de diamètre équivalent ~ entrée de cable de φ14mm à travers le joint en caoutchouc sur la mise en place de terminaux connectés, sera présenté par le cable écrou de compression pressé de faire le joint et pour empêcher retirer. ● Avant utilisation, vérifier le cablage est correct, les vis de fixation (vis) sont fixés au bo?tier. Fil de terre du cable doit être mise à la terre fiable. ● Lors de l'entretien "ouvertures non chargés" et pas cogner, joint dommages en caoutchouc. ● la réparation, s'il s'avère présenter joints, les joints et autres dispositifs sont vieillissants, doit être remplacé afin de garantir des performances de protection. ◎ BAD808-M (II) explosion LED preuve de transport léger et de stockage ● lumières dans le processus de transport LED, doit éviter tout choc ou un choc violent, et il devrait y avoir des mesures pour empêcher la pluie et la neige. ● LED doivent être stockés dans la circulation de l'air, ni ruissellement et l'invasion liquide, la température ambiante n'est pas supérieure à + 40 ℃, pas inférieure à -25 ℃, l'humidité relative de l'air inférieure à 98% (+ 25 ℃) entrep?t. ● LED autour de l'environnement du magasin, ne doivent pas contenir de métal et endommager l'isolation des gaz corrosifs. Explosion ◎ BAD808-M (II) LED preuve d'assurance de la qualité de la lumière ● Ce produit est en stricte conformité avec IS09001: 2000 normes de systèmes de management de la qualité internationaux pour le contr?le de la qualité pour assurer la qualité du produit est plus élevé que les normes nationales répondent parfaitement aux exigences de conception dans les trois ans suivant l'achat, le produit en utilisation normale toute défaillance (défaut non-humain) sans entretien par la Société. Explosion BAD808-M (II) lumières LED preuve BAD808-M (II) explosion lumières LED preuve Prix BAD808-M lampe (II) LED explosion de l'usine |
Vous êtes le 980441 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Yixing Hua Hong Electronics Manufacturing Co., Ltd Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie