- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- LED série de lampes anti-dé..
- LED Eclairage industriel Sé..
- LED lampe de rue série
- Série lampe à décharge
- L'éclairage industriel Série
- Série de lampes végétales e..
- Mobile série d'éclairage
- Fixe série légère anti-défl..
- Anti-déflagrant électrique ..
- Anti-corrosion électrique e..
- Liens amicaux
- emballage, le papier entreprises
- emballage, le papier produits
- emballage, le papier acheter des fils
- Ma carte de visite
- China Business Nouvelles
- Mon magasin mobile
- Anti-déflagrant électri..
- Anti-déflagrant d'écono..
- Anti-déflagrant fluores..
- Antidéflagrants non-pol..
- Mobile d'éclairage
- Lampe LED minière
- éclairage industriel
- Lampes à DEL antidéflag..
- LED lumières de rue
- Un éclairage fixe
- Efficace et respectueus..
- Honnêteté
- Histon électrique
- La qualité d'abord
- Faible teneur en carbon..
- Yixing Vantage Electric..
- Maison > Fournir > Feux anti-explosion 50W 60W70W 80WLED explosion lumières Lampe résistant Shenzhen vendre lumières de preuve Henan
Nom de l'information: | Feux anti-explosion 50W 60W70W 80WLED explosion lumières Lampe résistant Shenzhen vendre lumières de preuve Henan |
Publié: | 2014-11-19 |
Validité: | 30 |
Caractéristiques: | BAD808 |
Quantité: | |
Description Prix: | |
Description détaillée du produit: | Explosion BAD808-M (II) lumières LED 50W preuve 60W70W 80WLED explosion de la lampe lampe de lumières preuve vendu ◎ Shenzhen Scope ● 1 et Zone 2 IIA, IIB classe T1 ~ T6 groupe atmosphère explosive, comme les usines ou les lieux fins d'éclairage. lumières antidéflagrants peuvent travailler de manière fiable dans les conditions suivantes: ● altitude ne dépasse pas 2000m; ● température ambiante de fonctionnement -20 ~ + 40 ℃:; ● ambiante humidité relative de l'air inférieure à 98% (quand la température est à + 25 ℃); ● applique à Zone 1, Zone 2, II classe T1 ~ groupe T6 atmosphère explosive; ● Pas de dégats dans les métaux et les propriétés isolantes des lieux de gaz et à vapeur, des lieux ● En aucun tremblement important et les vibrations de choc; ● degré de pollution 3; ● Catégorie d'installation de classe II. ◎ caractéristiques structurelles ● Produit standard: GB3836.1 ~ 2-2010, Q / HH 001-2011. ● Ce produit est en alliage d'aluminium, après coup à grande vitesse dynamitage surface pulvérisation électrostatique, étanche, anti-poussière, anti-corrosion et d'autres fonctions. Acier exposé attaches en acier inoxydable, pièces transparentes avec effet verre anti-haute énergie, l'éclairage de la structure des articulations bouche antidéflagrants seulement, mais la chambre de chambre de la source et le cablage, conduire chambre séparée, une installation et un entretien facile et la performance électrique fiable; aluminium de haute qualité réflecteur couverture, d'améliorer l'efficacité de la lampe. ● La lampe a une vis de mise à la terre à l'intérieur et à l'extérieur de la coque, l'utilisateur utilise le produit doit être mis à la terre. Mur 30 ℃ ◎ paramètres techniques de grade preuve Ex II B T6 Gb tension nominale 220VAC 50Hz puissance nominale 50W 60W 70W 80W LED type de source de lumière de protection IP65 catégorie WF2 Dimensions Φ260 × H285mm pendentif d'installation (G) (b1) mur Formule 90 plafond ℃ (b2) de style de cl?ture (x) (f) de la loi-colonne (h) ◎ avant l'utilisation et l'entretien ● lumières installées figurant sur la plaque signalétique doit être vérifiée LED si la ligne de données techniques de base avec les conditions réelles d'utilisation. ● Il φ10mm équivalent de diamètre ~ entrée de cable de φ14mm par les joints en caoutchouc sur la mise en place de terminaux connectés, avec l'introduction de l'écrou de serrage de cable enfoncée, de sorte que le joint d'étanchéité et empêche retirer. ● Avant utilisation, vérifier le cablage est correct, les vis de fixation (vis) sont fixés au bo?tier. Fil de terre du cable doit être mise à la terre fiable. ● Lors de l'entretien "ouvertures non électrifiées" et peuvent ne pas heurter, endommager le joint en caoutchouc. ● la réparation, si trouvé à introduire les joints et autres dispositifs sont vieillissants, doit être remplacé afin de garantir des performances de protection. Lumières ◎ stockage transport ● LED dans le processus de transport, devraient éviter les chocs ou de fortes vibrations, et devraient avoir des mesures pour empêcher la pluie et la neige. 50W 60W70W 80WLED feux anti-explosion Lampe Shenzhen vendu fournisseurs ● LED doivent être stockés dans la circulation de l'air, pas de gouttes d'eau et l'invasion liquide, la température ambiante ne dépasse pas + 40 ℃, pas inférieure à -25 ℃, humidité relative de l'air inférieure à 98% (+ 25 ℃) entrep?t. ● Dans le stockage de lumières LED environnement ne doit pas contenir de métal et endommager l'isolation des gaz corrosifs. Assurance de la qualité ◎ ● Ce produit en stricte conformité avec IS09001: 2000 normes de systèmes de management de la qualité internationaux pour le contr?le de qualité pour assurer la qualité du produit est plus élevé que les normes nationales répondent parfaitement aux exigences de conception, depuis l'achat de trois ans, toute erreur (défaillance non-humain) produit par le produit en utilisation normale Société de maintenance. |
Vous êtes le 980441 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Yixing Hua Hong Electronics Manufacturing Co., Ltd Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie