- Maison
- Fils d'alimentation
- Acheter Leads
- A propos de nous
- Produits
- Nouvelles
- Honneurs
- Message
- Contacter
- Les catégories de produit
- LED série de lampes anti-dé..
- LED Eclairage industriel Sé..
- LED lampe de rue série
- Série lampe à décharge
- L'éclairage industriel Série
- Série de lampes végétales e..
- Mobile série d'éclairage
- Fixe série légère anti-défl..
- Anti-déflagrant électrique ..
- Anti-corrosion électrique e..
- Liens amicaux
- emballage, le papier entreprises
- emballage, le papier produits
- emballage, le papier acheter des fils
- Ma carte de visite
- China Business Nouvelles
- Mon magasin mobile
- Anti-déflagrant électri..
- Anti-déflagrant d'écono..
- Anti-déflagrant fluores..
- Antidéflagrants non-pol..
- Mobile d'éclairage
- Lampe LED minière
- éclairage industriel
- Lampes à DEL antidéflag..
- LED lumières de rue
- Un éclairage fixe
- Efficace et respectueus..
- Honnêteté
- Histon électrique
- La qualité d'abord
- Faible teneur en carbon..
- Yixing Vantage Electric..
- Maison > Fournir > Supply BAD808-PMDEL explosion feux Lampe résistant 80WLED 60WLED Liaoning explosion lumières preuve fabricants de lampes
Nom de l'information: | Supply BAD808-PMDEL explosion feux Lampe résistant 80WLED 60WLED Liaoning explosion lumières preuve fabricants de lampes |
Publié: | 2015-01-12 |
Validité: | 3000 |
Caractéristiques: | BAD808 |
Quantité: | 1000.00 |
Description Prix: | |
Description détaillée du produit: | Explosion BAD808-M (II) lumières LED preuve ◎ BAD808-M (II) explosion lumières LED preuve Portée ● 1 et zone 2 IIA, IIB classe T1 ~ groupe T6 atmosphère explosive, comme des usines ou lieux fins d'éclairage. Explosion lumières preuve feux BAD808-M (II) LED dans les conditions suivantes peuvent être fonctionner de manière fiable ● altitude ne dépasse pas 2000m; ● température ambiante de fonctionnement est de -20 ~ + 40 ℃:; ● l'air ambiant humidité relative inférieure à 98% (lorsque la température à + 25 ℃); ● adapté pour zone 1, zone 2, classe II T1 ~ groupe T6 atmosphères explosives; ● Aucun dommage dans les métaux et les propriétés isolantes du gaz et vapeurs place; ● en l'absence d'une secousse et le choc des vibrations significatives ● Niveau de pollution 3 ;; ● Catégorie d'installation II endroits de classe. ◎ BAD808-M (II) standard explosion lumières LED preuve caractéristiques structurelles ● Produit: GB3836.1 ~ 2-2010, Q / HH 001-2011. ● Ce produit est en alliage d'aluminium, après décapage de surface électrostatique pulvérisation à grande vitesse, étanche, anti-poussière, anti-corrosion et d'autres fonctions. Fixations en acier exposée inoxydable, parties transparentes trempé impact anti-haute énergie, lampes pour antidéflagrants bouche articulations de la structure seulement, mais la cavité de la chambre de source de lumière et le cablage, le lecteur de cavité séparée, installation et entretien facile, et la performance électrique fiable; aluminium de haute qualité réflecteur couverture, d'améliorer l'efficacité de la lampe. ● La lampe a une vis de sol à l'intérieur et à l'extérieur de la coque, l'utilisateur utilise le produit doit être mis à la terre. ◎ BAD808-M (II) LED explosion feux preuve paramètres techniques Antidéflagrant Ex II B T6 Gb tension nominale 220VAC 50Hz puissance nominale 50W 60W 70W 80W type de source de lumière LED de protection IP65 niveau de la corrosion installation pendentif WF2 Dimensions Φ260 × H285mm (G avant) murales 30 ℃ (b1) murales 90 ℃ (b2) Type de cl?ture plafond (x) (f) de la loi-colonne (h) ◎ BAD808-M (II) explosion lumières LED utilisent preuve et l'entretien ● LED feux installés doit vérifier si les données techniques de base figurant sur la ligne de plaque signalétique avec les conditions réelles d'utilisation. ● Il ya l'φ10mm de diamètre équivalent ~ entrée de cable φ14mm par l'introduction de joints en caoutchouc connectés aux bornes, avec l'introduction de l'écrou de serrage de cable pressé de faire le joint et pour empêcher retirer. ● Avant utilisation, vérifier le cablage est correct, les vis de fixation (boulons) sont fixés au bo?tier. Fil de terre du cable doit être mise à la terre fiable. ● entretien "Pas ouvertures en direct? et non bosse, joint en caoutchouc dommages. ● Maintenance, se il est trouvé à introduire joints, les joints et autres dispositifs ont vieillissement, devrait être remplacé pour assurer propriétés protectrices. ◎ BAD808-M (II) explosion lumières LED preuve de stockage de transport ● LED lumières dans le processus de transport, devraient éviter les chocs ou de fortes vibrations, et devraient avoir des mesures pour empêcher la pluie et la neige. ● LED doivent être stockés dans une circulation d'air, pas de gouttes d'eau et l'invasion liquide, la température ambiante ne est pas supérieure à + 40 ℃, pas inférieure à -25 ℃, l'humidité relative de l'air inférieure à 98% (+ 25 ℃) entrep?t. ● LED autour de l'environnement de stockage, ne doivent pas contenir de métal et endommager les gaz corrosifs d'isolation. Explosion feux preuve assurance de la qualité ● ◎ BAD808-M (II) LED Ce produit est en stricte conformité avec IS09001: 2000 normes de systèmes de management de la qualité internationaux pour le contr?le de la qualité pour assurer la qualité du produit est plus élevé que la norme nationale satisfaire pleinement les exigences de conception, depuis l'achat de trois ans, les produits en utilisation normale toute défaillance (défaillance non humain) GRATUIT maintenue par la Société. Explosion BAD808-M (II) LED lumières preuve BAD808-M (II) explosion lumières LED preuve Prix BAD808-M (II) explosion LED fabricants de lumières preuve |
Vous êtes le 980441 visiteur
Droit d'auteur © GuangDong ICP No. 10089450, Yixing Hua Hong Electronics Manufacturing Co., Ltd Tous droits réservés.
Support technique: ShenZhen AllWays Technologie Développement Co., Ltd.
AllSources réseau's désistement: La légitimité de l'information de l'entreprise ne s'engage pas à toute responsabilité de garantie